-
SIEMENS
-
ABB
-
EMERSON
-
SCHNEIDER
-
OMRON
-
PEPPERL+FUCHS
-
MTL
-
ROCKWELL AUTOMATION
-
HIRSCHMANN
-
GE
-
WEIDMULLER
-
WIKA
-
YOKOGAWA
- ▶ Pressure Transmitter EJA
- ▪ EJA110A
- ▪ EJA115
- ▪ EJA118W/EJA118N
- ▪ EJA120A
- ▪ EJA130A
- ▪ EJA210A/EJA220A
- ▪ EJA310A
- ▪ EJA430A
- ▪ EJA438W/EJA438N
- ▪ EJA440A
- ▪ EJA510A/EJA530A
- ▶ Pressue Transmitter EJX
- ▪ EJX110A
- ▪ EJX115A
- ▪ EJX118A
- ▪ EJX120A
- ▪ EJX130A
- ▪ EJX210A
- ▪ EJX310A
- ▪ EJX430A
- ▪ EJX438A
- ▪ EJX440A
- ▪ EJX510A
- ▪ EJX530A
- ▪ EJX610A
- ▪ EJX630A
- ▪ EJX910A
- ▪ EJX930A
- ▶ Magnetic Flowmeters
- ▪ ADMAG AXF Remote Flowtube
- ▪ AXFA14 Converter
- ▪ AXFA11 Converter
- ▪ ADMAG AXF Integral Flowmeter
- ▪ ADMAG AXW Magnetic Flowmeters
- ▪ ADMAG AXR Two-wire Magnetic Flowmeters
- ▪ ADMAG CA Series Capacitance Magnetic Flowmeters
- ▶ Vortex Flowmeter
- ▪ digitalYEWFLO Vortex Flowmeter (DY)
- ▪ digitalYEWFLO Reduced Bore Type Vortex Flowmeter (DY-RB)
- ▪ digitalYEWFLO Multivariable Type Vortex Flowmeter (DY-MV)
- ▪ digitalYEWFLO Vortex Flowmeter High process Temperature Version / Cryogenic Version (DY-HTLT)
- ▪ digitalYEWFLO Fieldbus Type Vortex Flowmeter (DY-FF)
- ▶ Ultrasonic Flowmeters
- ▪ US300PM Ultrasonic Flowmeter (Portable type)
- ▪ US300FM Ultrasonic Flowmeter (fixed type)
- ▶ Variable Area Flowmeters – Rotameters
- ▪ Variable Area Flowmeter-RAMC (Metal Short-stroke Rotameter)
- ▪ Variable Area Flowmeter-RAKD (Small Metal Rotameter)
- ▪ Model RAGN Rotameter
- ▪ Model RAGK/RAGL Rotameter
- ▶ PORTABLE AND HANDHELD INSTRUMENTS
- ▪ HANDY CALIBRATOR CA11E
- ▪ CA700 Pressure Calibrator
- ▪ HANDY TEMPERATURE CALIBRATOR CA12E
- ▪ HANDY MULTIFUNCTION CALIBRATOR CA71
- ▪ Yokogawa CA450 Process Multimeter
- ▪ HANDY CALIBRATOR CA150
-
WATSON SMITH
-
METRIX
-
ASCO
-
ENDRESS+HAUSER
-
BENTLY NEVADA
-
HACH
-
NORGREN
-
HONEYWELL
-
TESTO
-
PHOENIX CONTACT
-
SICK
-
DANFOSS
-
CISCO
-
IFM
-
KROHNE
-
ROSEMOUNT
-
FISHER
-
Percent Concentration Sensors ISC40
Conductivity measurement is a reliable indicator of the concentration of most acid or base solutions. The desired chemical concentration is achieved using a two stage mixing procedure. During the first stage, the flow ratio control unit on the missing tank is set to provide (x) gallon per minute of the full strength so...
-
Inductive (Torodial, Electrodeless) Conductivity Sensor ISC40
There are two basic sensor styles used for measuring Conductivity: Contacting and Inductive (Toroidal, Electrodeless). With Inductive Conductivity (also called Toroidal or Electrodeless), the sensing elements (electrode coils) of an inductive sensor do not come in direct contact with the process. These two matched (...
-
High Pressure/ High Temperature Conductivity Sensor SC42/SX42
High Pressure – High Temperature Contacting sensor primarily designed for Boiler Blowdown and Condensate Leak detection applications. These conductivity cells have extremely high temperature and pressure ratings: the threaded types can handle 16 bar at 200°C and the flanged types can handle 40 bar at 250°C.
-
Biotech/Pharma Contacting Conductivity Sensors
Yokogawa's SC450G and FLXA21 have proven to work very well over a wide range of conductivity values with suitable 4-electrode sensors. The Hamilton CONDUCELL 4US sensors for Triclover and INGOLD process connections has often been successfully used where the access port is too narrow for the Inductive Sensors. Now Hamil...
-
Pure Water (Low) Conductivity sensors SC4A/SC42
The measurement of specific conductivity in aqueous solutions is becoming increasingly important for the determination of impurities in water. The accuracy of the measurement is strongly influenced by temperature variations, polarization effects at the surface of the contacting electrodes, cable capacitances, etc. Yoko...
-
Contacting Conductivity Sensors SC42/SC4A
Why measure Conductivity? It can be used as a fairly inexpensive and low maintenance indicator of water quality. Good quality water with little contaminants will have a low conductivity. There is far less maintenance than pH and minimal calibration. Conductivity is used in Boiler feedwater, RO, and Demineralizer a...
-
Portable Conductivity Handheld Meter SC72
Compact, lightweight, and dripproof, the SC72 is the ideal Conductivity meter for field use. Features wide-range auto-ranging, automatic temperature compensation, self-diagnostic functions, and a large, easy-to-read LCD display Waterproof (IP67), sealed case and connector cover to keep out moisture Autoranging allo...
-
Modular Dual Input Transmitter/Analyzer FLEXA
The model FLEXA® two-wire analyzer is used for continuous on-line measurements in industrial installations. It offers an option for single or dual sensor measurement, making it the most flexible 2-wire analyzer available. The model FLEXA® modular-designed series analyzer offers 4 parameter choices – pH/ORP (oxidation-r...
-
Profibus Conductivity Transmitter/Analyzers
PROFIBUS is an open, digital communication system which covers factory and process automation. These analyzers are designed for 2-wire (loop powered) system configuration with PROFIBUS communication.
-
Fieldbus Conductivity Transmitter/ Analyzer
Fieldbus Foundation defines "Fieldbus is a digital, two-way, multi-drop communication link among intelligent measurement and control devices." It is one of several local area networks dedicated for industrial automation. The Internet is having a major impact on information flows. Yesterday's hierarchical syst...