Fourier Transform Near-Infrared Analyzer (FTNIR)
2016-05-27 15:24:22
Description:
NR800 is a FT-NIR analyzer offering unparalleled reliability and stability for a wide range of process and laboratory applications from Yokogawa. Its high wavelength resolution, outstanding accuracy and wide scanning range deliver a new level of process information, opening up new possibilities. Direct transfer of a calibration model from the laboratory to the process, or among processes, is also possible. And of course, ease of operation and user-friendly software are key design concepts of the NR800.……
New Products
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.
Assortments
▶ Pressure Transmitter EJA
▶ Pressure Transmitters EJA-E
▶ Pressue Transmitter EJX
▶ Safety Instrumented System (SIS)
▶ Valve Positioners & Converters
▶ Field Mount Indicators
▶ Temperature Transmitters
▶ Magnetic Flowmeters
▶ Vortex Flowmeter
▶ Ultrasonic Flowmeters
▶ Coriolis Mass Flowmeters - ROTAMASS 3-Series
▶ Variable Area Flowmeters – Rotameters
▶ Device Smart Communicators
▶ PORTABLE AND HANDHELD INSTRUMENTS
▶ Distributed Control System (DCS)
▶ Process Analyzers
▶ Paperless Recorders
▶ Strip Chart Recorders
▶ Data Acquisition Equipment
▶ UT Series Temperature Controllers
▶ UP Series Program Controllers
▶ UM Series Digital Indicators with Alarms
▶ UT100 Series Temperature Controllers
▶ UD Series Manual Setters
▶ Limit Controllers
▶ YS Series Single-loop Controllers
Description
InfraSpec NR800
InfraSpec NR800 is a FT-NIR analyzer offering unparalleled reliability and stability for a wide range of process and laboratory applications from Yokogawa. Its high wavelength resolution, outstanding accuracy and wide scanning range deliver a new level of process information, opening up new possibilities. Direct transfer of a calibration model from the laboratory to the process, or among processes, is also possible. And of course, ease of operation and user-friendly software are key design concepts of the NR800.
The NR800 FT-NIR from Yokogawa is based on over 50 years of R&D in analyzer systems especially spectrometers and sensing devices, and application experience gained as the leading supplier of process measurement and control systems.
Stability and reliability
In addition to the well-known features of FT-NIR of high throughput and quick response time, the NR800 employs a newly-developed Michelson interferometer with vibration-resistant mechanism that ensures even more reliable and stable operation. Unlike other FT-NIR systems, the NR800 runs without a PC as a completely stand-alone system for on-line measurement. Analyzer operations cannot be interrupted by a PC failure nor be affected by rapid changes in PC technology.
Single detector throughout the wavelength range
The measurement wavelength range of the NR800 is from 900 nm to 2500 nm, revealing new information and offering a more accurate calibration model. A single detector InGaAs is used throughout the scanning range.
High resolution
The wavelength resolution of the NR800 is from 4cm -1 . A best-fit band can be used for calibration models and measurement. High resolution is especially useful for foodstuff and pharmaceutical applications.
Calibration model transfer
Laboratory models can be applied directly to systems on the process stream, model transfer between analyzers can also be done. It realizes "seamless" transition from laboratory to process.
Double beam configuration
Double beam configuration is the standard features of NR800. It compensates disturbance of measurement originating from the change of environment conditions and affect of attenuation due to installation conditions.
Up to 4 multi-stream channels with no Optical multiplexers
The NR800 provides up to 4 channels for multiple spectrometers. Channel switching is done electrically and no mechanical moving parts are used, thus ensuring maximum reliability and fast response.
First-hand Experience
In 1993, Yokogawa released the NR500 as the first process FT-NIR for process monitoring, most parts of which such as the interferometer were specially designed from scratch for process use. The NR800 inherits the same design concept as well as field experience, and various improvements and additions have been made.