Conductivity Sensor SC210G
Yokogawa has been supplying superior on-line analyzers for monitoring or controlling the conductivity of liquids or solutions. Now, Yokogawa provides the SC450G four-wire conductivity/resistivity converter, the SC202G and SC202S two-wire conductivity/resistivity transmitters, and the SC100 panel mount conductivity converter. Yokogawa also provides many kinds of sensors for accurately measuring liquid conductivity when using converters/transmitters. The combination of Yokogawa's converters/transmitters and sensors meets the demanding ultrapurewater requirements of the growing semiconductor and pharmacentical markets in addition to the traditional water quality measurement requirements of standard power plant and chemical applications. The SC210G conductivity sensor is widely used in various water and manufacturing process applications. A wide variety of mountings are available including screw-in type, flange type, flow-through type, and screw-in type with gate valve.……
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.
▶ Pressure Transmitter EJA ▶ Pressure Transmitters EJA-E ▶ Pressue Transmitter EJX ▶ Safety Instrumented System (SIS) ▶ Valve Positioners & Converters ▶ Field Mount Indicators ▶ Temperature Transmitters ▶ Magnetic Flowmeters ▶ Vortex Flowmeter ▶ Ultrasonic Flowmeters ▶ Coriolis Mass Flowmeters - ROTAMASS 3-Series ▶ Variable Area Flowmeters – Rotameters ▶ Device Smart Communicators ▶ PORTABLE AND HANDHELD INSTRUMENTS ▶ Distributed Control System (DCS) ▶ Process Analyzers ▶ Paperless Recorders ▶ Strip Chart Recorders ▶ Data Acquisition Equipment ▶ UT Series Temperature Controllers ▶ UP Series Program Controllers ▶ UM Series Digital Indicators with Alarms ▶ UT100 Series Temperature Controllers ▶ UD Series Manual Setters ▶ Limit Controllers ▶ YS Series Single-loop Controllers
Conductivity Sensor SC210G
|Object of measurement||Conductivity of liquids or solutions|
|Measuring principle||Two-electrode system|
|Cell constant||0.05 cm, 5 cm|
|Measuring range||0-0.5 to 0-200 μS/cm (Cell constant: 0.05 cm)|
0-200 μS/cm to 0-20 mS/cm (Cell constant: 5 cm )
|Temperature Range||0 to 105 deg C (chamber material: SCS14)|
0 to 100 deg C (chamber material: Polypropylene)
|Pressure range||0 to 1 MPa (chamber material: SCS14)|
0 to 500 kPa(chamber material: Polypropylene)
|Measuring solution condition||Flow rate: less than 20 l/min is recommended for flow-through type.|
Air bubbles should not be mixed in the sample solutions to obtain correct measured values.
|Temperature sensor||PB36 NTC|
|Construction||JIS C0920 watertight (equivalent to NEMA4)|
|Process connection||Screw-in, Flange, Flow-through, with gate valve|