Chlorine Analyzers FC500G
FC500G non-reagent free available chlorine analyzer adopts the polarographic method, using a rotating electrode to continuously measure online the concentration of free available chlorine. The FC500G is intended for measurements in the water distribution network, at pumping stations, water delivery points, schools, and public facilities.……
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.
▶ Pressure Transmitter EJA ▶ Pressure Transmitters EJA-E ▶ Pressue Transmitter EJX ▶ Safety Instrumented System (SIS) ▶ Valve Positioners & Converters ▶ Field Mount Indicators ▶ Temperature Transmitters ▶ Magnetic Flowmeters ▶ Vortex Flowmeter ▶ Ultrasonic Flowmeters ▶ Coriolis Mass Flowmeters - ROTAMASS 3-Series ▶ Variable Area Flowmeters – Rotameters ▶ Device Smart Communicators ▶ PORTABLE AND HANDHELD INSTRUMENTS ▶ Distributed Control System (DCS) ▶ Process Analyzers ▶ Paperless Recorders ▶ Strip Chart Recorders ▶ Data Acquisition Equipment ▶ UT Series Temperature Controllers ▶ UP Series Program Controllers ▶ UM Series Digital Indicators with Alarms ▶ UT100 Series Temperature Controllers ▶ UD Series Manual Setters ▶ Limit Controllers ▶ YS Series Single-loop Controllers
|Measured Object||Free chlorine in tap water|
|Measuring System||Polarographic method using rotating electrode|
|Measuring Range||Any of 0 to 1/0 to 2/0 to 3 mg/l and 0 to 5/0 to 10 mg/l certainly, use to air purge|
|Output Signal||4 to 20mA DC (load resistance: Maximum 550 Ω)|
|Sample Solution Condition||Temperature: 0 to 40℃|
pH: 6.5 to 7.5
Flow Rate: 0.1 to 2.5 l/min (at cell inlet)
Pressure: 1 to 30 kPa (without VALVE)
1 to 150 kPa (with VALVE)
Conductivity: 100 to 300 μS/cm
SS (Suspended Solid): 10 mg/l or less
|Electrode||Indicating electrode: Rotating gold electrode|
Reference electrode: Silver electrode (with Pt1000 RTD installed)
|Electrode Cleaning||Ceramic bead cleaning|
|Ambient Temperature||-10 to 50℃|
|Power Supply||100 V AC/110 V AC / 200 V AC/220 V AC ±10 %, 50/60 Hz|
|Weight||Approx. 6.5 kg|
|Linearity||±5 % of full scale|
|Repeatability||2 % of full scale|
|Stability||Zero drift; ±1 % of full scale/month or less|
Span drift; -10 % of full scale/month or less
|Response time||Approx. 2 min (90 % response time)|