DIGITAL INSULATION TESTER MY40-hkxytech
  • DIGITAL INSULATION TESTER MY40

DIGITAL INSULATION TESTER MY40

2016-05-24 10:45:30

Description:

Digital model with 4 voltage/resistance ratings Multifunction Insulation resistance, AC voltage and conductor resistance measurement Insulation test mode: Comparator, memory, auto-hold and discharge functions All test modes: Live-line alarm (excluding AC voltage measurement), battery check and automatic power-off Easy-to-view, fluctuation-free display Double-action safety mechanism Weight including main unit and batteries only, excluding accessories……

Notice:
INSULATION TESTER ACCESSORIES Model Description 98007 Earth and Line Probe for 2406 B9646CA Test Lead Storage Bag (3213) B9600HA Case for 3213 321803 Lead for Terminal Guard (2406E; 3213A) B9600NZ Probe Tip Pointed #5 B9600NX Probe Tip Extension #3 B9600GN General Purpose Probe #1 B9600NV Probe Tip Storage Bag 98050 Line Probe and Earth Probe (3213A) 98002 My-Earth Probe B9075MU Hard Case with Probe Case (2406D & E) 99005 My-Shoulder Strap 93013 My-Protection Cover 98001 My-Line Probe

New Products

E+H FMU90-R11CA111AA3A Ultrasonic Level measurement, Endress+Hauser Prosonic FMU90

E+H FMU90-R11CA111AA3A Ultrasonic Level measurement, Endress+Hauser Prosonic FMU90. Level measurement of fluids and bulk materials with 1 or 2 sensors for measuring of up to 45m (148ft) and level limit detection.

E+H FMU90-R11CA131AA3A Ultrasonic Level measurement, Endress+Hauser Prosonic FMU90

E+H FMU90-R11CA131AA3A Ultrasonic Level measurement, Endress+Hauser Prosonic FMU90. Level measurement of fluids and bulk materials with 1 or 2 sensors for measuring of up to 45m (148ft) and level limit detection.

E+H FMU90-R11CA212AA3A Ultrasonic Level measurement, Endress+Hauser Prosonic FMU90

E+H FMU90-R11CA212AA3A Ultrasonic Level measurement, Endress+Hauser Prosonic FMU90. Level measurement of fluids and bulk materials with 1 or 2 sensors for measuring of up to 45m (148ft) and level limit detection.

E+H FMU42-APB2A22A Ultrasonic Sensor, Endress+Hauser Prosonic FMU42

E+H FMU42-APB2A22A Ultrasonic Sensor, Endress+Hauser Prosonic FMU42. Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 10m.

Assortments

Description

Specifications - MY40 Digital Insulation Tester

Width125 mm
Height103 mm
Depth53 mm
Display3 1/2-digit LCD; 4000 count; backlight-illuminated; logarithmic bar graph; extension bar graph-no fluctuations, as the display shows the digits of a reading in the order in which each digit settles.
Comparator FunctionThe MY40 alerts you by turning on the LOW symbol and sounding the buzzer if the measured value is smaller than the reference value. You can allocate as many as three user-defined reference values to each rating. The factory-set defaults are 0.1 MΩ, 0.2 MΩ and 0.4 MΩ.
Memory FunctionFor each rating, you can save as many as 20 measurements at desired memory address numbers.
Automatic Discharge FunctionThe MY40 automatically begins discharge when you turn off the MEAS switch. You can monitor the state of discharge by checking the bar graph and make sure discharge is complete by checking that the segment bar disappear.
High-Voltage IndicatorsThe high-voltage symbol and LED lamp come on to alert you when the MY40 is in insulation testing mode or if any voltage remains to be discharged.
Live-Line AlarmIf you apply an AC voltage of approximately 40 V or higher across the input terminals, the MY40 alerts you by blinking the LED lamp and sounding the buzzer.
Overrange Input AlarmIf the voltage being measured exceeds 600 V during AC voltage measurement, the MY40 alerts you by flashing the Maximum Value indicator and sounding the buzzer.
Auto-Hold FunctionThe tester retains the measured resistance for approximately 5 seconds after the MEAS switch is turned off.
BatteriesFour AA (R6P) batteries
Weight420 g
Ambient Temperature/Humidity Ranges23 ±5 /45-75% RH
Standard AccessoriesBatteries (Qty - 4)
Earth Probe (98002) (Qty - 1)
Line Probe (98001) (Qty - 1)
Protection Cover (93013) (Qty - 1)
Shoulder Strap (99005) (Qty - 1)
User's manual (Qty - 1)

 

Tolerance Mentioned Conditions

Max. Deviation from Zero Scale Value6 digits
Indication of mark on bar graphApprox. 4000 MΩ min. (500 V/1000 V)
Approx. 400 MΩ min. (125 V/250 V)
No-Load Voltage130% max. of rated voltage
Rated Measuring Current1 mA (0 to 20%) when in first effective measuring range
Max. Short-circuit Current2 mA

 

Testing Performance

ModelRatingRange OptionResolutionMeasuring RangeToleranceLower Limit of measured ΩRated CurrentCentral Scale Value
MY40-01125V/200MΩ0.40000.1kΩ0-0.0199MΩ± (5%of rdg+6dgt)0.125MΩ1mA5MΩ
4.0001kΩ0.0200-20.00MΩ*± (2%of rdg+6dgt)
40.0010kΩ20.01-200.0MΩ± 5%of rdg
200.0100kΩ

250V/200MΩ0.40000.1kΩ0-0.0499MΩ±(5%of rdg+6dgt)0.25MΩ1mA5MΩ
4.0001kΩ0.0500-20.00MΩ*± (2%of rdg+6dgt)
40.0010kΩ20.01-200.0MΩ±5%of rdg
200.0100kΩ

500V/2000MΩ4.0001kΩ0-0.999MΩ± (5%of rdg+6dgt)0.5MΩ1mA50MΩ
40.0010kΩ1.000-500MΩ*± (2%of rdg+6dgt)
400.0100kΩ501-2000MΩ± 5%of rdg
20001MΩ

1000V/2000MΩ4.0001kΩ0-1.999MΩ± (5%of rdg+6dgt)2MΩ0.5mA50MΩ
40.0010kΩ2.000-1000MΩ*± (2%of rdg+6dgt)
400.0100kΩ1001-2000MΩ± 5%of rdg
20001MΩ