
Watson Smith P/I Converter 71 Type 712102
2016-04-22 11:20:34
Description:
Watson Smith P/I Converter 71 Type 712102, The Type 71 P/I instruments convert pneumatic pressure into electrical signal. It is a two wire device, uses non- critical power supply and is supplied to IP65. With Hazardous Area approved to ATEX, its encapsulated electronics makes it good for shock/vibration performance.……
Notice:
Watson Smith P/I Converter 71 Type 712102, brand new, original in UK;
New Products
Emerson TREXCHPKL9S1 AMS Trex device communicator
Emerson TREXCHPKL9S1 AMS Trex device communicator. HART Application, ATEX, CSA US/Canada and IECEx intrinsically safe, Standard support 1 year. Enables HART or Fieldbus Module device communications, 5.7 inch touchscreen display, intrinsically safe.
Emerson TREXCHPKLWP3S AMS Trex device communicator
Emerson TREXCHPKLWP3S AMS Trex device communicator. HART Application, ATEX, CSA US/Canada and IECEx intrinsically safe, Wireless, Premium support 3 year, Carrying Case. Enables HART or Fieldbus Module device communications, 5.7 inch touchscreen display, intrinsically safe.
Emerson TREXCHPKLWP3 AMS Trex device communicator
Emerson TREXCHPKLWP3 AMS Trex device communicator. HART Application, ATEX, CSA US/Canada and IECEx intrinsically safe, Wireless, Premium support 3 year. Enables HART or Fieldbus Module device communications, 5.7 inch touchscreen display, intrinsically safe.
Emerson TREXCHPKLWP1S AMS Trex device communicator
Emerson TREXCHPKLWP1S AMS Trex device communicator. HART Application, ATEX, CSA US/Canada and IECEx intrinsically safe, Wireless, Premium support 1 year, Carrying Case. Enables HART or Fieldbus Module device communications, 5.7 inch touchscreen display, intrinsically safe.
Assortments
Description
Watson Smith P/I Converter 71 Type 712102
Watson Smith P/I Converter 71 Type 712102
The Type 71 P/I instruments convert pneumatic pressure into electrical signal. It is a two wire device, uses non- critical power supply and is supplied to IP65. With Hazardous Area approved to ATEX, its encapsulated electronics makes it good for shock/vibration performance.
• Hazardous Area Approved to ATEX
• Encapsulated electronics for good shock/vibration
performance
• A wide range of media compatibility
Watson Smith P/I Converter 71 Type 712102
Industry:
Paper converting, paper processing, wood
/ pulp processing, steel mills, plastics and
rubber manufacture, textile machinery,
wire handling.
Any industry requiring a reading of
pressure in a pneumatic system
converted to an electrical signal:-
• Dancer Arm Control
• Winder System
• Roller Tension System
• Roller Force Control
Solution:
Ensuring your application is operating at the right
pressure, the Type 71 measurers output pressure
and converts to a signal that can then be used to
offer application accuracy.
TECHNICAL DATA
• Media Compatibility Fluids compatible with Stainless Steel 316L and Hastelloy C276
• Air Consumption Nil
• Pressure Ranges 0.2 – 1.0 Bar, 3 – 15psi,
• Over pressure 2 x FS
• Connections ¼” BSP or ¼” NPT female
Physical
• I.P. Rating IP65
• Electromagnetic Compliant and CE marked in accordance with the EC E.M.C directive.
Compatibility Tested to standards: Immunity: EN 50082-1 : 1995
Emissions: EN 50081-1 : 1992
Surges: 600 V EN 61000-4-5: 1995
ESD: EN61000-4-2: 1995
• Material of Casing: Hastelloy C276/316 Construction Stainless Steel.
Transducer: Micro-machined silicon assembly
• Mass 210g (including socket)
• Mounting Direct pipe mounting
• Installation Torque 16 - 20 Nm
• Electrical Interface DIN 43650 plug/socket
• Electrical connection PIN 1 Supply Positive
PIN 2 Supply Negative
Earth not connected
• Supply Voltage Unit will withstand supply voltage polarity reversal without damage
Reversal
Electrical
• Supply Voltage 9 - 28 Vdc
• Output Current 4 - 20mA
Accuracy
• Zero & Span Setting ±0.5% FS Max. (±5% adjustment via integral pots.)
• Hysteresis, Linearity ±0.2% FS BSL
& Repeatability
• Stability Better than 0.2% FS per year
• Operating Temperature -20°C to +80°C
• Temperature Effects ±3.0% FS Total error band -20°C to +80°C
• Insulation Resistance Greater than 10M Ohms at 500 Vdc
Watson Smith P/I Converter 71 Type 712102
List of available models: 710101, , 710102, 712101, 712102