Rockwell SoftLogix Control System
Our SoftLogix™ controllers use a common control engine with a common development environment to provide high performance in an easy-to-use environment. A typical SoftLogix system uses a virtual chassis application that houses controllers and communication modules, which interface with other Logix controllers and I/O modules. I/O simulator modules in the virtual chassis make application debugging and system start-up easier.……
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.
1789 SoftLogix Controllers
Bulletin 1789 SoftLogix™ Controllers are based on the Logix platform. They seamlessly integrate machine control, motion control, and information processing. They take the control functions normally found in dedicated programmable controllers, encapsulate those functions in software and run them on a commercial operating system. The multi-tasking operating system supports 32 configurable tasks that you can prioritize.
Use Bulletin 1784 Communication Cards with your SoftLogix™ controllers to monitor and control I/O on ControlNet™ or DeviceNet™ networks. Use your own Ethernet card to communicate over EtherNet/IP™ networks. Use the built-in serial port on your SoftLogix controller to communicate over RS-232 serial networks. Install multiple communication interfaces into the SoftLogix PC to configure a gateway to bridge or route control and information data between different networks.
Use Studio 5000 Logix Designer software to program your SoftLogix™ system.
The controllers and modules you select, along with your network configuration, determine what additional software packages you need to configure and program your system. Additional required software may include RSNetWorx network configuration software and RSLinx communication software.
Additional software products are available from Rockwell Software.
|Integrated Architecture Brochure||IA-BR005||JA| PT|
|SoftLogix5800 System User Manual||1789-UM002||EN|
|Logix5000 Controllers Design Considerations Reference Manual||1756-RM094||EN|
|Logix5000 Controllers Common Procedures Programming Manual||1756-PM001||EN| JA|
|More SoftLogix5800 publications in Literature Library||All Languages|