
SINAMICS V90 Basic Servo Drive System
2015-06-24 15:29:07
Description:
SINAMICS V90 – Description Enlarge SINAMICS V90 is designed to meet general purpose servo drive applications. It is easy to commission the SINAMICS V90 system - essentially just plug & play. Further, it has optimized servo performance, can be quickly integrated into SIMATIC PLC control systems and has a high degree of reliability. A seamless drive system is created by combining SINAMICS V90 servo drive with our SIMOTICS S-1FL6 servomotor.……
New Products
HCD2-FBPS-1.500 Fieldbus Power Supply - Pepperl+Fuchs
HCD2-FBPS-1.500 Fieldbus Power Supply, module for fieldbus power hub. This Power Supply Module is a system component for the FieldConnex®Power Hub and can be plugged into the motherboard.
HiC2025 SMART Transmitter Power Supply - Pepperl+Fuchs
Pepperl+Fuchs HiC2025 is a SMART transmitter power supply designed for analog input, boasting a Safety Integrity Level (SIL) of 2 and a Systematic Capability (SC) of 3.
HiC2031 SMART Current Driver - Pepperl+Fuchs
Pepperl+Fuchs HiC2031 is a SMART Current Driver featuring analog output. This isolated barrier is used for intrinsic safety applications.
OMRON 3G3MX2-AB022-V2 inverter drive
OMRON 3G3MX2-AB022-V2 MX2-EV2 inverter drive, 2.2/3.0 kW (ND/LD), 11.0/12.0 A (ND/LD), 200 VAC, 1~ input, sensorless vector, max. output freq. 590Hz
Assortments
▶ Temperature Sensor
▶ Pressure Sensor
▶ SITRANS Transmitter
▶ Industrial Ethernet switches
▶ Pointek CLS200 - Standard
▶ SIRIUS soft starters
▶ Circuit breaker
▶ Positioners
▶ Low Voltage Converters SINAMICS V – For Basic Drive Tasks
▶ Low Voltage Converters MICROMASTER 4
▶ Valve Positioner
▶ SIMATIC S7-1200
▶ SINAMICS AC Drive
▶ Programmable Logic Controller
Description
SINAMICS V90 Basic Servo Drive System
The performance-optimized and easy-to-use servo drive system
SINAMICS V90 – Description
SINAMICS V90 is designed to meet general purpose servo drive applications. It is easy to commission the SINAMICS V90 system - essentially just plug & play. Further, it has optimized servo performance, can be quickly integrated into SIMATIC PLC control systems and has a high degree of reliability. A seamless drive system is created by combining SINAMICS V90 servo drive with our SIMOTICS S-1FL6 servomotor.
SINAMICS V90 – an overview of its strengths
Optimized servo performance
Auto tuning enables machines to achieve a high dynamic performance
Automatic suppression of machine resonances
1 MHz high-frequency pulse train input
Multi-turn absolute encoder with 20-bit resolution
Cost-effective
Integrated control modes: Pulse train positioning, internal positioning, speed and torque control modes
Integrated internal positioning function
Integrated braking resistor in all frame sizes
Integrated holding brake switch, no external relay necessary
Easy to use
Easy servo tuning and machine optimization
Easy commissioning with SINAMICS V-ASSISTANT
Parameter cloning
Reliable operation
Wide voltage range 380 V ~ 480 V, -15% /+10%
High quality motor bearings
All motors have IP65 degree of protection and are equipped with oil seal
Integrated safe torque off (STO)
Reliable drive and motor combination
SINAMICS V90 – an overview of the technology
Power range: | 0.4 kW - 7.0 kW |
Voltage: | 3AC 380 V ... 480 V (-15 % / +10 %) |
Control modes: | Pulse train positioning, internal positioning, speed, torque |
SIMOTICS S-1FL6 – Description
SIMOTICS S-1FL6 are permanent-magnet synchronous motors. They are designed for operation without external cooling and the heat is dissipated through the motor surface. Motors can be simply and quickly installed thanks to the quick-release connectors. When combined with the SINAMICS V90 servo drive, a powerful servo drive system with high functionality is created.
SIMOTICS S-1FL6 – an overview of the technology
Shaft heights: | 45mm, 65mm, 90mm |
Rated torque: | 1.27 Nm to 33.40 Nm |
Rated speed: | 2000 or 3000 rpm |
Encoder types: | Incremental encoder TTL 2500 S/R (13-bit resolution) |
Degree of protection: | IP65, natural cooling |
Option: | Holding brake |
Shaft type: | Plain shaft or feather key |
SINAMICS V90 – typical applications
Handling machines e.g. pick & place machines
Packaging machines e.g. labeling machines, Horizontal packaging machines
Automatic assembly machines
Metal forming machines
Printing machines e.g. screen printing machines
Winders and unwinders