Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.
Krohne DW182C052RRAK1NDN65 Flow Switch Flow Controller Krohne DW182C052RRAK1NDN65 Flow Switch Flow Controller in stock
Introduction of Krohne DW182C052RRAK1NDN65 Flow Switch Flow Controller Krohne DW182C052RRAK1NDN65 Flow Switch Flow Controller in stock
The DW 182 inline flow controller is suitable for horizontal or vertical pipes. It has flanged connections, sizes ranging from DN 15...DN 65 or from 1/2...2".
The measuring tube and connection is made of 316 L (1.4404) stainless steel. There are two types of indicator available for this variant:
a linear scale with up to two alarm positions at the top and bottom of the indicator
a dial (as shown) which has been made specifically for the instrument and tested on a calibration rig
For information on DW 182 flow ranges, please refer to the flow range tables.
Highlights of Krohne DW182C052RRAK1NDN65 Flow Switch Flow Controller Krohne DW182C052RRAK1NDN65 Flow Switch Flow Controller in stock
Permanent readings using a powerful magnet
No need for a power supply to indicate flow
Unique Ex d design (without dial for local readings)
High temperature version (without local indication) can operate up to 300°C (570°F)
Available for process pressures up to 120 bar (1740 psig)
No pipe diameter limit: Insertion-type version is suitable for pipes > 250mm
Any tube length is available for easy replacement of existing units
Large choice of process connections and wetted parts material
With optional stainless steel housing
Works with any clean liquid in any position
High reliability and repeatability
Alarm position: set by factory free of charge during test rig flow calibration
Each instrument is individually calibrated and tested
Switch value can be dry-tested!
Optional 3-wire device (without local indication) with 4-20 mA current output (not CE certified!)
Power supply device and digital indication possible via C95 Ci or similar
Similar model codes of Krohne DW182C052RRAK1NDN65 Flow Switch Flow Controller Krohne DW182C052RRAK1NDN65 Flow Switch Flow Controller in stock