Fluke 789 ProcessMeter Calibration tools mA loop calibrators Fluke 789 loop calibration multimeter
2019-04-09 09:51:43
Description:
Includes 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check……
New Products
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.
Assortments
Description
Fluke 789 ProcessMeter Calibration tools mA loop calibrators Fluke 789 loop calibration multimeter
Specifications of Fluke 789 ProcessMeter Calibration tools mA loop calibrators Fluke 789 loop calibration multimeter
Specifications | ||
Current measurement | Range | 0-1 A AC or DC |
Resolution | 1 mA | |
Accuracy | 0.2% + 2 LSD (DC) | |
Range | 0-30 mA | |
Resolution | 0.001 mA | |
Accuracy | 0.05% + 2 lSD |
Other useful features of Fluke 789 ProcessMeter Calibration tools mA loop calibrators Fluke 789 loop calibration multimeter
Includes 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check
Provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper
Simultaneous displays mA and % of scale readings
Provides 20 mA DC current source/loop calibrator/simulator
Offers manual step (100%, 25%, Coarse, Fine) plus auto step and auto ramp
Delivers 0.1% dc voltage accuracy and 0.05% dc current accuracy
Provides 1200 ohm drive capability on mA source
Offers HART mode setting with loop power and a built-in 250 ohm resistor
Offers externally accessible fuses and batteries for easy replacement
Similar model codes of Fluke 789 ProcessMeter Calibration tools mA loop calibrators Fluke 789 loop calibration multimeter :
Fluke 710 mA Loop Valve Tester/ Fluke 710 Valve Testing Loop Calibrator
Fluke 789 ProcessMeter/ Fluke 789 loop calibration multimeter
Fluke 787B ProcessMeter
Fluke 709H Precision mA Loop Calibrator with HART Communications / Diagnostics
Fluke 709 Precision mA Loop Calibrator
Fluke 773 Milliamp Process Clamp Meter
Fluke 772 Milliamp Clamp Meter
Fluke 771 Milliamp Process Clamp Meter
Fluke 715 Volt/mA Loop Calibrator
Fluke 707Ex Intrinsically Safe mA Loop Calibrator
Fluke 705 Loop Calibrator
Fluke 754 Documenting Process Calibrator-HART
Fluke 726 Precision Multifunction Calibrators
Fluke 725Ex Series Process Calibrator
Fluke 753 Documenting Process Calibrator
Fluke 719 Pressure Calibrator
Fluke 707 Current Loop Calibrator with Quick Click Knob
Fluke 725 Multifunction Process Calibrator
If you have any question, please do not hesitate to contact with me online
Contact details :
Shirley Sun
Sales Engineer
HONGKONG XIEYUAN TECH CO., LIMITED
Add : 7-A16, Caishen Commercial Plaza, Hankou Railway Station, Wuhan, China
M : +86-15172506760 (WhatsApp & Wechat) | T : +86-27-85309780 | F : +86-27-85309780
Email : Shirley@whxyauto.com Skype : 169649423@qq.com
Web : www.hkxytech.com