UD310 Manual Setter
2016-09-18 14:55:37
Description:
The UD310 manual setter has PV display, and transmit 4 to 20 mA DC by manual operation.It can be used as a remote setter for digital indicating controllers like UTAdvanced series controllers. The SP (target setpoint) will be output in 3 seconds after the change. The TC, RTD or Voltage input is possible as PV input. When the PV display is not necessary, it can be disappeared. The two alarm outputs and a PV retransmission output are provided as standard. The front panel has a splash-proof and dust-proof design (IP65), which enables the use in the dusty environment. ……
New Products
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.
Assortments
▶ Pressure Transmitter EJA
▶ Pressure Transmitters EJA-E
▶ Pressue Transmitter EJX
▶ Safety Instrumented System (SIS)
▶ Valve Positioners & Converters
▶ Field Mount Indicators
▶ Temperature Transmitters
▶ Magnetic Flowmeters
▶ Vortex Flowmeter
▶ Ultrasonic Flowmeters
▶ Coriolis Mass Flowmeters - ROTAMASS 3-Series
▶ Variable Area Flowmeters – Rotameters
▶ Device Smart Communicators
▶ PORTABLE AND HANDHELD INSTRUMENTS
▶ Distributed Control System (DCS)
▶ Process Analyzers
▶ Paperless Recorders
▶ Strip Chart Recorders
▶ Data Acquisition Equipment
▶ UT Series Temperature Controllers
▶ UP Series Program Controllers
▶ UM Series Digital Indicators with Alarms
▶ UT100 Series Temperature Controllers
▶ UD Series Manual Setters
▶ Limit Controllers
▶ YS Series Single-loop Controllers
Description
Overview
UD310 manual setter
The UD310 manual setter has PV display, and transmit 4 to 20 mA DC by manual operation.It can be used as a remote setter for digital indicating controllers like UTAdvanced series controllers. The SP (target setpoint) will be output in 3 seconds after the change. The TC, RTD or Voltage input is possible as PV input. When the PV display is not necessary, it can be disappeared. The two alarm outputs and a PV retransmission output are provided as standard. The front panel has a splash-proof and dust-proof design (IP65), which enables the use in the dusty environment.
All Models
UD310 manual setter
UD310-00